Decks  
   
Decks
Retaining Walls
Deck Coating
Topping Slab
Sealers & Primers
Below Grade
Drain Boards and Between Slab
Waterproofing
Tile Waterproofing
Tile Thin-Set
Sloping
Bituthane
Below Grade
Decks
Membrane
Bituthane
Coatings
Bituthane

Below Grade Waterproofing



AVM System 500 - Aussie Membrane
Below Grade Waterproofing | Foundation Waterproofing - Single Component
(ICC ESR-2503, L.A. RR#25550)


Click to Enlarge

The AVM AUSSIE MEMBRANE is a Water-Based rubber/bitumen liquid membrane modified with high performance rubberized polymers giving it excellent adhesion, which dries to a tough, black seamless flexible waterproof membrane. The AUSSIE MEMBRANE is a single component thixotropic cold-applied bitumen paste that exhibits excellent elongation and recovery properties. The AVM Aussie Membrane has excellent long-term stability (maintains its properties over very long periods of time) un-like other below grade systems (including polyurethane based systems) that Crack and become brittle as they age.

AVM System 502 - Aussie II
Below Grade Waterproofing | Foundation Waterproofing - 2 Component
(ICC ESR-2503, L.A. RR#25550)


Click to Enlarge

The AVM AUSSIE MEMBRANE II is a 2-part Water-Based rubber/bitumen liquid membrane modified with high performance rubberized polymers giving it excellent adhesion, which dries to a tough, black seamless flexible waterproof membrane. The AUSSIE MEMBRANE II is a cold-applied liquid bitumen that exhibits excellent elongation and recovery properties. The AVM Aussie Membrane II has excellent longterm stability (maintains its properties of very long periods of time) un-like other below grade systems (including polyurethane based systems) that Crack and become brittle as they age.

AVM System 512 - Patch 512
Fast Curing Block Wall Waterproofing Patch for Below Grade | Foundation Waterproofing


Click to Enlarge

Patch 512 is a thick fast curing bitumen (Aussie 500 + Curing Powder) that sets up in less than an hour. Patch 512 is an advanced ecologically friendly polymer modified bitumen. Patch 512 may be used as a patching compound for filling holes, cracks and voids or as a membrane when short cure times are needed. After curing, Patch 512 creates a tough and flexible seamless waterproofing membrane. This product may be applied in one thick layer (up to 1 inch thick) using a taping knife, trowel, brush, roller or squeegee.

 
Coatings