Below Grade
AVM System 512 - Patch 512
Fast Curing Block Wall Waterproofing Patch
(ICC ESR-2503, L.A. RR#25550)
Patch 512 is a thick, fast curing bitumen (Aussie 500 + Curing Powder) that sets up in less than an hour. Patch 512 is an advanced, ecologically friendly polymer modified bitumen based patch. Patch 512 may be used as a patching compound for filling holes, cracks and voids or as a membrane when short cure times are needed. After curing, Patch 512 creates a tough and flexible seamless waterproofing membrane. Patch 512 may be applied in one thick layer (up to 1 inch thick) using a taping knife, trowel, brush, roller or squeegee.
Pedestrian Deck Coatings
AVM System 650SF
The AVM System 650SF decking system is designed for everyday use and is a solvent free, low odor, liquid applied, moisture cured, urethane waterproof system. The AVM System 650SF elastomeric decking system consists of an epoxy primer, two coats of a polyurethane basecoat and one or more coats of polyurethane topcoat. The AVM System 650SF decking system can be applied to protect surfaces against spalling, freeze/thaw damage, and chemicals commonly encountered on these surfaces. It is designed to expand and contract with normal structural movements. It will neither soften in heat nor embrittle in cold.
Urethane Vehicular Deck Coating
AVM System 680SF
The AVM System 680SF, vehicular deck system is a solvent free, liquid applied, high solids, moisture cured waterproof system. The system utilizes an epoxy primer and one easy to use high tensile, solvent free, aromatic urethane to complete the system. The AVM System 680SF vehicular deck system is a user-friendly application of a low odor coating that is specifically designed to be tough and durable enough to withstand vehicular traffic. It is an elastomeric system designed to expand and contract with normal structural movements. The three coat application saves time and labor.
