|
AVM Crete 6200
|
Click to Enlarge
|
A polymer fortified cement mix, designed to be used as a heavy duty texture, slurry coat, scratch coat or bond coat. AVM 6200 may also be used as a patching compound and for minor sloping or leveling repairs not exceeding ¼ inch in thickness. AVM Crete 6200 reaches 6000 PSI after 28 days.
|
|
AVM Crete 6400
|
Click to Enlarge
|
Is a polymer fortified cement mix, designed to be used for sloping, leveling and underlayment applications ranging from 1/8 inch thick to 4 inches thick. AVM Crete 6400 reaches 3700 PSI after 28 days.
|
|
AVM Concrete Additive 7160
|
Click to Enlarge
|
AVM Concrete Additive 7160, is a ready to use concrete Additive add-mixture. The AVM Concrete Additive 7160 allows the cement mix to be used for thin sloping, leveling, resurfacing, patching. AVM Concrete Additive 7160 will increase strength, performance, bonding and water resistance. It will reduce Cracking, Chipping, Flaking and Shrinkage as well.
|
|
AVM Concrete Additive 7300
|
Click to Enlarge
|
AVM Concrete Additive 7300, is a concentrated Acrylic based concrete Additive add-mixture formulated to provide long open times for the wet concrete mix. AVM Concrete Additive 7300 is ideal for thin Stamped Concrete applications and was designed specifically to be used with AVM's stamping mix, AVM Aggregate 300.
|
|
AVM Concrete Additive 7400
|
Click to Enlarge
|
Ready to use, acrylic concrete additive for the most demanding applications. Allows the cement mix to be used for scratch coats, slurry coats, thin sloping, leveling or patching applications over concrete and plywood substrates. In addition, it may be combined with thin-set mortars for tile setting.
|
