Got a Question? Give us a call! 818-888-0050

AVM System 500 – Aussie Membrane

Below Grade Waterproofing | Foundation Waterproofing – Single Component
(ICC ESR-2503, L.A. RR#25550)
The AVM AUSSIE MEMBRANE is a Water-Based rubber/bitumen liquid membrane modified with high performance rubberized polymers giving it excellent adhesion, which dries to a tough, black seamless flexible waterproof membrane. The AUSSIE MEMBRANE is a single component thixotropic cold-applied bitumen paste that exhibits excellent elongation and recovery properties. The AVM Aussie Membrane has excellent long-term stability (maintains its properties over very long periods of time) un-like other below grade systems (including polyurethane based systems) that Crack and become brittle as they age.

AVM System 502 – Aussie II

Below Grade Waterproofing | Foundation Waterproofing – 2 Component
(ICC ESR-2503, L.A. RR#25550)
The AVM AUSSIE MEMBRANE II is a 2-part Water-Based rubber/bitumen liquid membrane modified with high performance rubberized polymers giving it excellent adhesion, which dries to a tough, black seamless flexible waterproof membrane. The AUSSIE MEMBRANE II is a cold-applied liquid bitumen that exhibits excellent elongation and recovery properties. The AVM Aussie Membrane II has excellent longterm stability (maintains its properties of very long periods of time) un-like other below grade systems (including polyurethane based systems) that Crack and become brittle as they age.
The AVM Aussie Membrane 520 is a vapor-proof,Gray liquid polyurethane, which dries to a tough, seamless flexible waterproof membrane. The Aussie Membrane 520 is a single component cold-applied polyurethane liquid. It exhibits excellent adhesion, strength, elongation and recovery properties.

Aussie Skin 550

Below Grade Waterproofing | Puncture Resistant Sheet Waterproofing Membrane
AVM Crete Skin 550 is a Heavy, Duty, Easy to Install, Puncture Resistant Sheet Waterproofing Membrane with added technologies creating excellent adhesion between the membrane andwet Concrete or Shot-Crete. Once the Concrete or Shot-Crete is cured, the membrane will become fully bonded to the concrete surfaces eliminating any potential migration of water between itself and the concrete surfaces it is bonded to.

Aussie Membrane 570 – Hot Rubber

Below Grade Waterproofing | Hot Rubber
Aussie Membrane 570 – Hot Rubber, is a hot-applied asphalt-based composition membrane applied in a liquid state to form a continuous, seamless, tough, flexible, black, fully-adhered waterproofing membrane. Aussie Membrane 570 – Hot Rubber exhibits excellent elongation and recovery properties and maintains excellent long term stability.

GPL 16

Below Grade Waterproofing | Green Polyolifin Liner, 16 Mils Thick
Heavy Duty, Class A Vapor Retarder and Membrane Liner. GPL-16 is a 16 mils thick, heavy duty, high performance green polyolefin vapor retarder and membrane liner.

AVM System 512 – Patch 512

Fast Curing Block Wall Waterproofing Patch for Below Grade | Foundation Waterproofing
Patch 512 is a thick fast curing bitumen (Aussie 500 + Curing Powder) that sets up in less than an hour. Patch 512 is an advanced ecologically friendly polymer modified bitumen. Patch 512 may be used as a patching compound for filling holes, cracks and voids or as a membrane when short cure times are needed. After curing, Patch 512 creates a tough and flexible seamless waterproofing membrane. This product may be applied in one thick layer (up to 1 inch thick) using a taping knife, trowel, brush, roller or squeegee.
Type and press "enter" to search