Got a Question?

Request More Info on the Aussie Membrane 520

Contact Us
Aussie Membrane 520h

Aussie Membrane 520

Below Grade Waterproofing – Single Component Polyurethane

The AVM Aussie Membrane 520 is a vapor-proof,Gray liquid polyurethane, which dries to a tough, seamless flexible waterproof membrane. The Aussie Membrane 520 is a single component cold-applied polyurethane liquid. It exhibits excellent adhesion, strength, elongation and recovery properties.

SYSTEM COMPONENTS

Aussie Membrane 520 aussie 520 bucket

Aussie Membrane 520

4.75 Gal Bucket

Polyurethane waterproofing membrane

AVM Mat 570 Spunbonded Polyester Mat

AVM Mat 570

360 Yards long x 48” Wide

Spunbonded Polyester Mat

OPTIONAL COMPONENTS

Epoxy Primer 400 5 gallon bucket

Epoxy Primer 400

1.25 Gal Kit | 5 Gal Kit

Epoxy primer

Mat 800 three size variants reinforcement mats

Mat 800

6”x81’ | 40”x81’ | 40”x324 6”x100yrd | 12”x100yrd

Reinforcement mat for use with multiple AVM systems

GALLERY

GALLERY

MATERIAL CALCULATOR  

60 Mil Thickness
  • How many square feet is your job?

  • SYSTEM COMPONENTS
  • WHAT YOU NEED
  • Epoxy Primer (Optional)

  • Gallons
  • Aussie 520 @ 60 Mils Dry

  • Gallons
  • AVM Drain Board 6,000 4'x50'

  • Rolls
  • or
  • AVM Drain Board 6,000 8'x50'

  • Rolls
  • OPTIONAL COMPONENTS
  • AVM Mat 800 (40"x324')

  • sqft/roll
  • AVM Mat 800 (12"x300')

  • L/F
  • AVM Mat 800 (6"x300')

  • L/F
  • WANT TO SAVE A COPY?

Refer to page 2 of “Specifications Sheet” (in pdf) for available packaging sizes
This is an estimating tool only. Actual quantities needed may vary by job conditions and other factors.
Both drain board sizes are listed for convenience purposes.
Additional components/materials not listed here might be needed.
For additional guidance, contact our sales staff at 818-888-0050
AVM reserves the right to change any information on this document at any time witout notice.

90 Mil Thickness
  • How many square feet is your job?

  • SYSTEM COMPONENTS
  • WHAT YOU NEED
  • Epoxy Primer (Optional)

  • Gallons
  • Aussie 520 @ 90 Mils Dry

  • Gallons
  • AVM Drain Board 6,000 4'x50'

  • Rolls
  • or
  • AVM Drain Board 6,000 8'x50'

  • Rolls
  • OPTIONAL COMPONENTS
  • AVM Mat 800 (40"x324')

  • sqft/roll
  • AVM Mat 800 (12"x300')

  • L/F
  • AVM Mat 800 (6"x300')

  • L/F
  • WANT TO SAVE A COPY?

Refer to page 2 of “Specifications Sheet” (in pdf) for available packaging sizes
This is an estimating tool only. Actual quantities needed may vary by job conditions and other factors.
Both drain board sizes are listed for convenience purposes.
Additional components/materials not listed here might be needed.
For additional guidance, contact our sales staff at 818-888-0050
AVM reserves the right to change any information on this document at any time witout notice.

120 Mil Thickness
  • How many square feet is your job?

  • SYSTEM COMPONENTS
  • WHAT YOU NEED
  • Epoxy Primer (Optional)

  • Gallons
  • Aussie 520 @ 120 Mils Dry

  • Gallons
  • AVM Drain Board 6,000 4'x50'

  • Rolls
  • or
  • AVM Drain Board 6,000 8'x50'

  • Rolls
  • OPTIONAL COMPONENTS
  • AVM Mat 800 (40"x324')

  • sqft/roll
  • AVM Mat 800 (12"x300')

  • L/F
  • AVM Mat 800 (6"x300')

  • L/F
  • WANT TO SAVE A COPY?

Refer to page 2 of “Specifications Sheet” (in pdf) for available packaging sizes
This is an estimating tool only. Actual quantities needed may vary by job conditions and other factors.
Both drain board sizes are listed for convenience purposes.
Additional components/materials not listed here might be needed.
For additional guidance, contact our sales staff at 818-888-0050
AVM reserves the right to change any information on this document at any time witout notice.

ARCHITECTURAL DETAILS

SYSTEM 520 – SINGLE COMPONENT POLYURETHANE

PDFS

0520 – View-ALL (PDF)

Backfilled Walls

0520.0002 – Backfilled Wall on Footing with Vapor Barrier (PDF) (DWG)
0520.0004 – Transition to Vapor Barrier, Backfilled Wall Flush Footing (DWG) (PDF)
0520.0006 – Transition to Aussie Skin Underslab, Flush Footing (DWG) (PDF)

Corners

0520.7006 – Outside Corner (DWG) (PDF)
0520.7008 – Inside Corner (DWG) (PDF)

Decks & Planters

0520.1102 – Deck to Wall Transition, Unreinforced System, ISO (PDF)
0520.1100 – Deck to Wall Transition, Reinforced System, ISO (DWG) (PDF)
0520.1102 – Deck to Wall Transition, Unreinforced System, ISO (DWG)
0520.1104 – Deck to Wall Transition with Flashing, Reinforced System (DWG) (PDF)
0520.1105 – Deck to Wall Transition with Flashing, Unreinforced System (DWG) (PDF)
0520.1106 – Split Slab Assembly, Reinforced System (DWG) (PDF)
0520.1107 – Split Slab Assembly, Unreinforced System (DWG) (PDF)
0520.1200 – Construction Joints, Reinforced System (DWG) (PDF)
0520.1201 – Construction Joints, Unreinforced System (DWG) (PDF)
0520.1204 – Plywood Joints, Reinforced System (DWG) (PDF)
0520.1205 – Plywood Joints, Unreinforced System (DWG) (PDF)
0520.1206 – Precast Joints, Reinforced System (DWG) (PDF)
0520.1207 – Precast Joints, Unreinforced System (DWG) (PDF)

Penetrations

0520.1505 – Deck Drain-Flush, Unreinforced System (PDF)
0520.1504 – Deck Drain-Flush, Reinforced System (DWG) (PDF)
0520.1505 – Deck Drain-Flush, Unreinforced System (DWG)
0520.1506 – Deck Drain with Inspection Cover, Reinforced System (DWG) (PDF)
0520.1507 – Deck Drain with Inspection Cover, Unreinforced System (DWG) (PDF)
0520.1508 – Split Slab Two-Stage Drain, Reinforced System (DWG) (PDF)
0520.1509 – Split Slab Two-Stage Drain, Unreinforced System (DWG) (PDF)
0520.6502 – Typical Wall Penetration (DWG) (PDF)
0520.6504 – Cored Wall Penetration (DWG) (PDF)
0520.6505 – Sleeved Wall Penetration (DWG) (PDF)
0520.6510 – Multiple Pipe Penetration (DWG) (PDF)
0520.6512 – Deck Pipe Penetration, Reinforced System (DWG) (PDF)
0520.6513 – Deck Pipe Penetration, Unreinforced System (DWG) (PDF)

Terminations & Transitions

0520.6002 – Planter Terminations (DWG)
0520.1108 – Split Slab Edge Termination, Reinforced System (DWG) (PDF)
0520.1109 – Split Slab Edge Termination, Unreinforced System (DWG) (PDF)
0520.6002 – Planter Terminations (PDF)
0520.6004 – Sidewalk Termination, Reinforced System (DWG) (PDF)
0520.6005 – Sidewalk Termination, Unreinforced System (DWG) (PDF)
0520.6006 – Backfilled Wall Terminations (DWG) (PDF)
0520.8000 – Transition to Aussie Skin, Reinforced System (DWG) (PDF)
0520.8001 – Transition to Aussie Skin, Unreinforced System (DWG) (PDF)
0520.8002 – Transition to Aussie Skin Dual System, Reinforced System (DWG) (PDF)
0520.8003 – Transition to Aussie Skin Dual System, Unreinforced System (DWG) (PDF)