AVM System 500

Aussie Membrane Below Grade Waterproofing – Single Component

The AVM AUSSIE MEMBRANE ® is vapor-proof, brown rubber/ bitumen liquid emulsion with excellent adhesion, which dries to a tough, black seamless flexible waterproof membrane. The AUSSIE MEMBRANE is a thixotropic cold applied bitumen emulsion with added rubber latex. It exhibits excellent elongation and recovery properties. Downloads and Additional Information

ICC ESR-2503L.A. RR#25550

SYSTEM COMPONENTS

Aussie Membrane

5 Gal Bucket

Single component below grade waterproofing

Primer 500

2 & 5 Gal Bucket

Blue water-based primer

Adhesive 501

5 Gal Bucket

Solvent-Based Contact Adhesive

OPTIONAL COMPONENTS

Mat 800

6”x81’ | 40”x81’ | 40”x324 6”x100yrd | 12”x100yrd

Reinforcement mat for use with multiple AVM systems

GALLERY

GALLERY

MATERIAL CALCULATOR  

60 Mil Thickness
  • How many square feet is your job?

  • SYSTEM COMPONENTS
  • WHAT YOU NEED
  • AVM Primer 500

  • Gallons
  • Aussie Membrane @ 60 Mils Dry

  • Gallons
  • AVM Drain Board 6,000 4'x50'

  • Rolls
  • or
  • AVM Drain Board 6,000 6.5'x50'

  • Rolls
  • OPTIONAL COMPONENTS
  • AVM Mat 800 (40"x324')

  • sqft/roll
  • AVM Mat 800 (12"x300')

  • L/F
  • AVM Mat 800 (6"x300')

  • L/F
  • WANT TO SAVE A COPY?

Refer to page 2 of “Specifications Sheet” (in pdf) for available packaging sizes
This is an estimating tool only. Actual quantities needed may vary by job conditions and other factors.
Both drain board sizes are listed for convenience purposes.
Additional components/materials not listed here might be needed.
For additional guidance, contact our sales staff at 818-888-0050
AVM reserves the right to change any information on this document at any time witout notice.

90 Mil Thickness
  • How many square feet is your job?

  • SYSTEM COMPONENTS
  • WHAT YOU NEED
  • AVM Primer 500

  • Gallons
  • Aussie Membrane @ 90 Mils Dry

  • Gallons
  • AVM Drain Board 6,000 4'x50'

  • Rolls
  • or
  • AVM Drain Board 6,000 6.5'x50'

  • Rolls
  • OPTIONAL COMPONENTS
  • AVM Mat 800 (40"x324')

  • sqft/roll
  • AVM Mat 800 (12"x300')

  • L/F
  • AVM Mat 800 (6"x300')

  • L/F
  • WANT TO SAVE A COPY?

Refer to page 2 of “Specifications Sheet” (in pdf) for available packaging sizes
This is an estimating tool only. Actual quantities needed may vary by job conditions and other factors.
Both drain board sizes are listed for convenience purposes.
Additional components/materials not listed here might be needed.
For additional guidance, contact our sales staff at 818-888-0050
AVM reserves the right to change any information on this document at any time witout notice.

120 Mil Thickness
  • How many square feet is your job?

  • SYSTEM COMPONENTS
  • WHAT YOU NEED
  • AVM Primer 500

  • Gallons
  • Aussie Membrane @ 120 Mils Dry

  • Gallons
  • AVM Drain Board 6,000 4'x50'

  • Rolls
  • or
  • AVM Drain Board 6,000 6.5'x50'

  • Rolls
  • OPTIONAL COMPONENTS
  • AVM Mat 800 (40"x324')

  • sqft/roll
  • AVM Mat 800 (12"x300')

  • L/F
  • AVM Mat 800 (6"x300')

  • L/F
  • Protective Panels 4'x8' - 1st Layer

    Thickness 1/4"
  • Sheets
  • WANT TO SAVE A COPY?

Refer to page 2 of “Specifications Sheet” (in pdf) for available packaging sizes
This is an estimating tool only. Actual quantities needed may vary by job conditions and other factors.
Both drain board sizes are listed for convenience purposes.
Additional components/materials not listed here might be needed.
For additional guidance, contact our sales staff at 818-888-0050
AVM reserves the right to change any information on this document at any time witout notice.

180 Mil Thickness
  • How many square feet is your job?

  • SYSTEM COMPONENTS
  • WHAT YOU NEED
  • AVM Primer 500

  • Gallons
  • Aussie Membrane @ 180 Mils Dry

  • Gallons
  • AVM Mat 800 Reinforcing Fabric - 1st Layer

  • Rolls
  • AVM Mat 800 Reinforcing Fabric - 2st Layer

  • Rolls
  • AVM Drain Board 6,000 4'x50'

  • Rolls
  • or
  • AVM Drain Board 6,000 6.5'x50'

  • Rolls
  • Protective Panels 4'x8' - 1st Layer

    Thickness 1/4"
  • Sheets
  • Protective Panels 4'x8' - 2st Layer

    Thickness 1/4"
  • Sheets
  • OPTIONAL COMPONENTS
  • AVM Mat 800 (12"x300')

  • L/F
  • AVM Mat 800 (6"x300')

  • L/F
  • WANT TO SAVE A COPY?

Refer to page 2 of “Specifications Sheet” (in pdf) for available packaging sizes
This is an estimating tool only. Actual quantities needed may vary by job conditions and other factors.
Both drain board sizes are listed for convenience purposes.
Additional components/materials not listed here might be needed.
For additional guidance, contact our sales staff at 818-888-0050
AVM reserves the right to change any information on this document at any time witout notice.

ARCHITECTUAL DETAILS

SYSTEM 500 – AUSSIE MEMBRANE

OVER CONCRETE SUBSTRATES

0500 – View-ALL (PDF)
0500-0002-C-Retaining-Walls-Slab-On-Grade-At-Top-Of-Footing-CS (PDF)(DWG)
0500-0004-C-Retaining-Walls-Slab-On-Grade-At-Top-Of-Footing-CS (PDF)(DWG)
0500-0006-C-Retaining-Walls-Slab-On-Grade-At-Top-Of-Footing-CS (PDF)(DWG)
0500-0008-C-Retaining-Walls-Elevated-Slab-On-Grade-At-Top-Of-Footing-CS (PDF)(DWG)
0500-1502-C-Planter-Basic-Detail-CS (PDF)(DWG)
0500-2002-C-Topping-Slab-On-Concrete-CS (PDF)(DWG)
0500-2012-C-Topping-Slab-On-Concrete-HD-CS (PDF)(DWG)
0500-2022-C-Topping-Slab-On-Concrete-MD-CS (PDF)(DWG)
0500-2072-C-Topping-Slab-On-Concrete-Drains-Edges-HD-CS (PDF)(DWG)
0500-2074-C-Topping-Slab-On-Concrete-Drains-Edges-MD-CS (PDF)(DWG)
0500-3002-C-Pavers-On-Concrete-CS (PDF)(DWG)
0500-6002-C-Termination-Walls-CS (PDF)(DWG)
0500-6004-C-Termination-Side-Walk-CS (PDF)(DWG)
0500-6502-C-Pipe-Thru-Wall-CS (PDF)(DWG)
0500-6504-C-Pipe-Thru-Wall-Cored-CS (PDF)(DWG)
0500-6702-C-Pipe-Thru-Slab-01-CS (PDF)(DWG)
0500-7002-C-Waterproofing-at-Deck-Drain-CS (PDF)(DWG)
0500-8002-C-Crack-Repair-01-CS (PDF)(DWG)

OVER PLYWOOD SUBSTRATES

0500-2502-P-Topping-Slab-On-Plywood-HD-CS (PDF)(DWG)
0500-2522-P-Topping-Slab-On-Plywood-MD-CS (PDF)(DWG)
0500-2572-P-Topping-Slab-On-Plywood-Drains-Edges-HD-CS (PDF)(DWG)
0500-2574-P-Topping-Slab-On-Plywood-Drains-Edges-MD-CS (PDF)(DWG)
0500-2580-P-Plywood-Joints-Topping-Slab-On-Plywood-CS (PDF)(DWG)
0500-2582-P-Plywood-Joints-Metal-Straps-Topping-Slab-On-Plywood-CS (PDF)(DWG)