Aussie Clay Granules
Aussie Clay Granules are high-quality, loose-form sodium bentonite granules used as a supplemental waterproofing component in AVM’s bentonite-based systems. These granules are composed of 100% naturally occurring, water-activated sodium bentonite clay, which swells when hydrated to form a dense, self-sealing gel. They are designed to enhance waterproofing continuity around transitions, irregular surfaces, and penetrations by filling voids and reinforcing critical areas.
Where to Use
AVM Aussie Clay Sealant is used with the following AVM systems:
- AVM Aussie Clay Series – Including Aussie Clay, Aussie Clay PL, and Aussie Clay Composite systems
- Any compatible bentonite-based waterproofing system requiring detailing mastic for seams, penetrations, or transitions
Key Features
- Self-Sealing Action — Expands upon contact with water to seal off gaps, cracks, and voids.
- Versatile Application — Can be broadcast, packed, or poured to fit around irregular shapes and hard-to-reach locations.
- Natural and Effective — Made from 100% pure sodium bentonite, offering reliable, chemical-free waterproofing support.
- Cost-Effective Supplement — Enhances the effectiveness of primary membrane systems at a minimal additional cost.
Material
Loose Granular (Powdered Form)
System
Used as a component in below-grade waterproofing systems
Documents
- Details
Backfilled
- 0590 – Backfilled – View-ALL (PDF)
- 0590.0002 – CIP, NH – Backfilled Wall 01 (DWG) (PDF)
- 0590.0003 – CIP, NH – Backfilled Wall 02 (DWG) (PDF)
- 0590.0102A – CIP, NH – Typical Backfilled Wall 01 (DWG) (PDF)
- 0590.0102B – CIP, NH – Typical Backfilled Wall 02 (DWG) (PDF)
- 0590.0103 – CIP, NH – Typical Backfilled Wall 03 (DWG) (PDF)
- 0590.0205 – CIP, NH – Backfilled Wall – Pipe Penetration (DWG) (PDF)
- 0590.0207 – CIP, NH – Backfilled Wall – Sleeved Pipe Penetration (DWG) (PDF)
- 0590.0302 – CIP, NH – Backfilled Wall – Grade Termination 01 (DWG) (PDF)
- 0590.0304 – CIP, NH – Backfilled Wall – Grade Termination 02 (DWG) (PDF)
- 0590.0306 – CIP, NH – Backfilled Wall – Brick Ledge Termination 01 (DWG) (PDF)
- 0590.0308 – CIP, NH – Backfilled Wall – Brick Ledge Termination 02A (DWG) (PDF)
Blind Side
- 0590 – Blind Side – View-ALL (PDF)
- 0590.0001A – Under Slab Assembly – Single System (DWG) (PDF)
- 0590.0001B – Under Slab Assembly – Dual Layer (DWG) (PDF)
- 0590.0010 – CIP – Blind Side Waterproofing Over Metal Sheet Piling (DWG) (PDF)
- 0590.0012 – SC – Blind Side Waterproofing Over Metal Sheet Piling 02 (DWG) (PDF)
- 0590.0100 – CIP – Blind Side Waterproofing Over Lagging (DWG) (PDF)
- 0590.0101 – CIP, SC, H, NH – Blind Side Waterproofing Over Lagging (DWG) (PDF)
- 0590.0110 – CIP, NH – Blind Side Waterproofing Over Lagging, US Drainage (DWG) (PDF)
- 0590.0112 – NH, SC – Blind Side Waterproofing Over Lagging, US Drainage (DWG) (PDF)
- 0590.0200 – CIP – Pipe Penetration (DWG) (PDF)
- 0590.0202 – SC – Pipe Penetration (DWG) (PDF)
- 0590.0206 – CIP – Sleeved Pipe Penetration (DWG) (PDF)
- 0590.0208 – SC – Sleeved Pipe Penetration (DWG) (PDF)
- 0590.0210 – Slab Penetration Over Mud Slab (DWG) (PDF)
- 0590.0215 – Slab Penetration Over Compacted Earth (DWG) (PDF)
- 0590.0220 – SC – Typical Soldier Pile (DWG) (PDF)
- 0590.0222 – CIP – Typical Soldier Pile (DWG) (PDF)
- 0590.0223 – CIP – Back Lagged Soldier Pile (DWG) (PDF)
- 0590.0224 – SC – Back Lagged Soldier Pile (DWG) (PDF)
- 0590.0225 – SC – Metal Tie-Back Cover (DWG) (PDF)
- 0590.0230 – CIP – Metal Tie-Back Cover (DWG) (PDF)
- 0590.0235 – SC – Tie-Back Cover (DWG) (PDF)
- 0590.0236 – CIP – Tie-Back Cover (DWG) (PDF)
Technical Data Sheet
Safety Data Sheet