Aussie Mate 580-AL
Aussie Mate 580-AL is a high-performance, multi-layer composite waterproofing membrane. It combines aluminum foil, reinforced films, and advanced adhesive resins to deliver outstanding vapor and waterproofing protection. The aluminum layer provides an effective barrier against water and gas transmission, while the laminated film structure adds mechanical strength and durability. Its pressure-sensitive adhesive backing allows for easy application and excellent bond to approved substrates.
Where to Use
- Foundation walls
- Underslab vapor barriers
- Basement waterproofing
- Elevator pits
- Podiums and plaza decks
- Concrete and masonry structures
- Precast and cast-in-place assemblies
Key Features
- Vapor and Gas Barrier — Aluminum core blocks both moisture and soil gas transmission for comprehensive protection.
- Durable Multi-Layer Build — Reinforced film structure provides high tensile strength, puncture resistance, and long-term performance.
- Easy Application — Self-adhesive backing allows for fast installation with minimal tools or equipment.
- Cold-Applied System — No heat or flame required, improving jobsite safety and installation flexibility.
Material
Sheet Product (Multi-Layer Membrane with Aluminum Core and Pressure-Sensitive Adhesive)
System
Both Below-Grade and Above Grade Waterproofing and Vapor Intrusion Mitigation System
Installation
See Installation Instructions for warnings, installation instructions and information on various application surfaces.
Documents
- Approvals
- Technical Data Sheets
- Specifications
- Details
- 0580-AL_580-PL – View-ALL (PDF)
- 0580-AL_0580-PL-0001 – Backfilled Wall Vertical Overview (DWG) (PDF)
- 0580-AL_0580-PL-0002 – Backfilled Wall on Footing With Vapor Barrier (DWG) (PDF)
- 0580-AL_0580-PL-0004 – Transition to Vapor Barrier, Backfilled Wall Flush Footing (DWG) (PDF)
- 0580-AL_0580-PL-0006 – Transition to Aussie Skin Underslab, Flush Footing (DWG) (PDF)
- 0580-AL_0580-PL-0102 – Elevator Pit Transition to Aussie Skin, Extended Footing (DWG) (PDF)
- 0580-AL_0580-PL-0104 – Elevator Pit Transition to Aussie Skin, Flush Footing (DWG) (PDF)
- 0580-AL_0580-PL-1102 – O1 Deck to Wall Transition, ISO (DWG) (PDF)
- 0580-AL_0580-PL-1104 – O2 Deck to Wall Transition (DWG) (PDF)
- 0580-AL_0580-PL-1106 – Split Slab Assembly (DWG) (PDF)
- 0580-AL_0580-PL-1108 – Split Slab Edge Termination (DWG) (PDF)
- 0580-AL_0580-PL-1200 – Control Joint (DWG) (PDF)
- 0580-AL_0580-PL-1504 – Deck Drain Flush (DWG) (PDF)
- 0580-AL_0580-PL-1506 – Deck Drain With Inspection Cover (DWG) (PDF)
- 0580-AL_0580-PL-1508 – Split Slab Two-Stage Drain (DWG) (PDF)
- 0580-AL_0580-PL-6002 – Planter Terminations (DWG) (PDF)
- 0580-AL_0580-PL-6004 – Sidewalk Termination (DWG) (PDF)
- 0580-AL_0580-PL-6006 – Backfilled Wall Terminations (DWG) (PDF)
- 0580-AL_0580-PL-6502 – Typical Wall Penetration (DWG) (PDF)
- 0580-AL_0580-PL-6504 – Cored Wall Penetration (DWG) (PDF)
- 0580-AL_0580-PL-6505 – Sleeved Wall Penetration (DWG) (PDF)
- 0580-AL_0580-PL-6506 – Penetration Target Patch Sheet (DWG) (PDF)
- 0580-AL_0580-PL-6510 – Multiple Pipe Penetration (DWG) (PDF)
- 0580-AL_0580-PL-6512 – Deck Pipe Penetration (DWG) (PDF)
- 0580-AL_0580-PL-7004 – Lapping Detail (DWG) (PDF)
- 0580-AL_0580-PL-7006 – Outside Corner (DWG) (PDF)
- 0580-AL_0580-PL-7008 – Inside Corner (DWG) (PDF)
Methane
- 0580-AL-Methane – View-ALL (PDF)
- 0580-AL-0002 – Backfilled Wall on Footing With Vapor Barrier (DWG) (PDF)
- 0580-AL-0004 – Transition to Vapor Barrier, Backfilled Wall Flush Footing (DWG) (PDF)
- 0580-AL-0101-Methane – End Outlet Connector (DWG) (PDF)
- 0580-AL-0110 – Methane DV Vent (DWG) (PDF)
- 0580-AL-4001-Methane – Under Slab Assembly Over Compacted Earth (DWG) (PDF)
- 0580-AL-4011-Methane – Under Slab Assembly Over Severely Contaminated Earth (DWG) (PDF)
- 0580-AL-4016-Methane – Typical Horizontal Membrane Termination (DWG) (PDF)
- 0580-AL-4018-Methane – Typical Vertical Membrane Termination (DWG) (PDF)
- 0580-AL-4020-Methane – Sub-Slab Vent System (DWG) (PDF)
- 0580-AL-6710-Methane – Multiple Pipe Bank Pitch Pan (DWG) (PDF)
- 0580-AL-6712-Methane – Vertical Pipe Penetration (DWG) (PDF)
- 0580-AL-6714-Methane – Typical Floor Drain (DWG) (PDF)
- 0580-AL-7002-Methane – Lapping Detail (DWG) (PDF)
Safety Data Sheet
Gallery
