AVM Industries homepage
Phone in black

Call Us

(818) 888-0050

Got a Question?

Request more info on any of our products

CONTACT US

Aussie Skin 550G Detail Strip

Aussie Skin 550G Detail Strip

Aussie Skin Detail Strip 550G is a high-performance, pre-formed waterproofing tape designed for sealing seams, joints, and terminations within waterproofing assemblies. Composed of high-density polyethylene (HDPE) and a pressure-sensitive adhesive layer, this detail strip is engineered to form a watertight bond over critical areas that require additional protection against water ingress. Its advanced adhesive properties ensure strong adhesion to both concrete and membrane surfaces, creating a seamless barrier.

Where to Use

Aussie Skin Detail Strip 550G is designed for use with the following AVM systems:

  • AVM Aussie Skin 550

Key Features

  • Watertight Protection — Provides an impermeable barrier against water intrusion in high-risk areas.
  • Excellent Adhesion — Bonds securely to concrete, metal, and HDPE surfaces, ensuring long-term performance.
  • Flexible and Durable — Accommodates minor structural movement without compromising its seal.
  • Cost-Effective System — Provides long-term waterproofing protection at a competitive price.

Material

  • Sheet Product (Pre-formed HDPE Detail Strip)

System

  • Used as a component in below-grade Aussie Skin 550G waterproofing systems

Installation

Documents

    Technical Data Sheet

    Safety Data Sheet
  • Details
    • 0550G – View-ALL (PDF)

    Post Applied Walls

    • 0550G_0560G.0002 – Slab on Grade Over Aussie Skin, Concrete Walls 500_502 (DWG) (PDF)
    • 0550G_0560G.0004 – Slab on Grade with Footing Over Aussie Skin, Concrete Walls Aussie Mate (DWG) (PDF)
    • 0550G_0560G.0006 – Slab on Grade Over Aussie Skin, Concrete Walls 520 (DWG) (PDF)
    • 0550G_0560G.0008 – Slab on Grade Over Aussie Skin CMU Block Walls 500_502 (DWG) (PDF)
    • 0550G_0560G.0010 – Slab on Grade Over Aussie Skin CMU Block Walls 520 (DWG) (PDF)
    • 0550G_0560G.0012 – Slab on Grade Over Aussie Skin Concrete Walls Minimal Exposed Footing 500_502 (DWG) (PDF)
    • 0550G_0560G.0014 – Slab on Grade Over Aussie Skin Concrete Walls Minimal Exposed Footing 520 (DWG) (PDF)
    • 0550G_0560G.0016 – Elevated Slab Over Aussie Skin Concrete Walls 500_502 (DWG) (PDF)
    • 0550G_0560G.0018 – Elevated Slab Over Aussie Skin Concrete Walls 520 (DWG) (PDF)
    • 0550G_0560G.0020 – Elevated Slab Over Aussie Skin, Concrete Walls Aussie Mate (DWG) (PDF)
    • 0550G_0560G.0022 – Aussie Membrane Installation Over Aussie Skin (DWG) (PDF)

    Slab Wall Transition

    • 0550G_0560G.1200 – Typical Lagging Wall (DWG) (PDF)
    • 0550G_0560G.1210 – Blindside Lagging Slab to Wall Transition (DWG) (PDF)
    • 0550G_0560G.1212 – Blindside Lagging Slab to Wall Transition, Insulation (DWG) (PDF)
    • 0550G_0560G.1220 – Lagging Wall with Rock Pocket (DWG) (PDF)
    • 0550G_0560G.1224 – Raised Slab Non-Hydrostatic (DWG) (PDF)
    • 0550G_0560G.1225 – Raised Slab, Shotcrete Retaining Wall, Non-Hydrostatic (DWG) (PDF)
    • 0550G_0560G.1228 – Raised Slab with Vapor Barrier (DWG) (PDF)
    • 0550G_0560G.1229 – Transition to Vapor Barrier Underslab (DWG) (PDF)
    • 0550G_0560G.1230 – Mat Slab with Underslab Drainage (DWG) (PDF)
    • 0550G_0560G.1240 – Typical Metal Sheet Pile Retaining Wall (DWG) (PDF)
    • 0550G_0560G.1242 – Typical Shotcrete Retaining Wall (DWG) (PDF)
    • 0550G_0560G.1244 – Sheet Pile Retaining Wall (DWG) (PDF)
    • 0550G_0560G.3000 – Elevator Pit Over Aussie Skin (DWG) (PDF)

    Tie Back & Soldier Piles

    • 0550G_0560G.1530 – Metal Tie-Back Cover (DWG) (PDF)
    • 0550G_0560G.1531 – Detensioned Tie-Back (DWG) (PDF)
    • 0550G_0560G.1532 – 4 Inch Tie-Back Cover (DWG) (PDF)
    • 0550G_0560G.1533 – 6 Inch Tie-Back Cover (DWG) (PDF)
    • 0550G_0560G.1534 – 8 Inch Tie-Back Cover (DWG) (PDF)
    • 0550G_0560G.1535 – Detensioned Tie-Back – Option 2 (DWG) (PDF)
    • 0550G_0560G.1536 – Wall Pipe Raker (DWG) (PDF)
    • 0550G_0560G.1537 – Wall I-Beam Raker (DWG) (PDF)
    • 0550G_0560G.1540 – Back Lagged Soldier Pile (DWG) (PDF)
    • 0550G_0560G.1542 – Mid Lagged Soldier Pile (DWG) (PDF)
    • 0550G_0560G.1544 – Cement Board at Grade (DWG) (PDF)

    Grade Beams & Pile Caps

    • 0550G_0560G.2610 – Pile Cap Detail – Hydrostatic (DWG) (PDF)
    • 0550G_0560G.2630 – Pile Cap Detail – Non-Hydrostatic (DWG) (PDF)
    • 0550G_0560G.2550 – Aussie Skin Over Grade Beam – Non-Hydrostatic (DWG) (PDF)
    • 0550G_0560G.2540 – Aussie Skin Over Grade Beam – Hydrostatic (DWG) (PDF)
    • 0550G_0560G.2500 – Aussie Skin Under Grade Beam – Hydrostatic (DWG) (PDF)

    Penetrations

    • 0550G_0560G.2800 – Pipe Raker in Slab (DWG) (PDF)
    • 0550G_0560G.2802 – Aussie Skin Pipe Bank Pitch Pan (DWG) (PDF)
    • 0550G_0560G.2804 – Slab Penetration (Single) (DWG) (PDF)
    • 0550G_0560G.2806 – Well Pipe Sealing Boxout (DWG) (PDF)
    • 0550G_0560G.2808 – Slab Tie Penetration (DWG) (PDF)
    • 0550G_0560G.2810 – Aussie Skin Underslab Repair (DWG) (PDF)
    • 0550G_0560G.4000 – Through Wall Penetration (Single System, Sealant on Sanded Side) (DWG) (PDF)
    • 0550G_0560G.4002 – Multiple Through Wall Penetrations (Single System, Sealant on Sanded Side) (DWG) (PDF)
    • 0550G_0560G.4003 – Vertical Pitch Pan (Pre-Applied) (DWG) (PDF)
    • 0550G_0560G.4004 – Vertical Pitch Pan (Post-Applied) (DWG) (PDF)
    • 0550G_0560G.4005 – Sleeved Pipe Penetration (DWG) (PDF)
    • 0550G_0560G.4010 – Cored Penetration (Sealant on HDPE Side) (DWG) (PDF)
    • 0550G_0560G.4015 – Cored Penetration (DWG) (PDF)

    Laps, Fasteners & Corners

    • 0550G_0560G.4100 – Rebar Tie (DWG) (PDF)
    • 0550G_0560G.4102 – Eye Lag Screw (DWG) (PDF)
    • 0550G_0560G.4200 – Non-Flush Fastener (DWG) (PDF)
    • 0550G_0560G.4205 – Nail Screw Detail (DWG) (PDF)
    • 0550G.6000 – Factory Lap Detailing (DWG) (PDF)
    • 0550G.6002 – Non-Factory Lap Detailing (DWG) (PDF)
    • 0550G.6004 – Non-Factory Lap with Detail Strip (DWG) (PDF)
    • 0550G_0560G.6005 – Lapping Detail with Aussie Seal M and Sanded Tape (DWG) (PDF)
    • 0550G_0560G.6006 – Factory Laps in Shotcrete Hydrostatic (DWG) (PDF)
    • 0550G_0560G.6007 – Non-Factory Laps in Shotcrete Hydrostatic (DWG) (PDF)
    • 0550G_0560G.6008 – Non-Factory Laps in Shotcrete Hydrostatic (Heat) (DWG) (PDF)
    • 0550G_0560G.6010 – T-Lap Detail (DWG) (PDF)
    • 0550G.6015 – Standard Overlap Spacing (DWG) (PDF)
    • 0550G_0560G.6020 – Under Slab Assembly (DWG) (PDF)
    • 0550G_0560G.6200 – Inside Corner Detail (DWG) (PDF)
    • 0550G_0560G.6210 – Inside Corner (DWG) (PDF)
    • 0550G_0560G.6260 – Outside Corner Detail at Bottom of Wall (DWG) (PDF)
    • 0550G_0560G.6265 – Outside Corner Detail at Top of Wall (DWG) (PDF)
    • 0550G_0560G.8002 – Repair Procedure for Large Areas (DWG) (PDF)
    • 0550G_0560G.8004 – Repair Procedure for Cuts and Slices (DWG) (PDF)

    Transitions & Terminations

    • 0550G_0560G.7000 – Grade Transition to Aussie Mate (DWG) (PDF)
    • 0550G_0560G.7010 – Aussie Skin Lagging to Aussie Mate Free Standing (DWG) (PDF)
    • 0550G_0560G.7020 – Aussie Skin Installation Over Aussie Membrane 500 / 502 / 520 (DWG) (PDF)
    • 0550G_0560G.7022 – Aussie Skin Underslab Transition to Aussie Mate – Option 1 (DWG) (PDF)
    • 0550G_0560G.7024 – Aussie Skin Underslab Transition to Aussie Mate – Option 2 (DWG) (PDF)
    • 0550G_0560G.7500 – Termination at Grade – Option 1 (DWG) (PDF)
    • 0550G_0560G.7505 – Termination at Grade – Option 2 (DWG) (PDF)

    Aussie Clay 550 Dual System

    • 0550G_0560G – Aussie Dual System – View ALL (PDF)
    • 0550G_0560G-1226AC – Aussie Dual System – Raised Slab Slab Underslab Drainage Full Wrap (DWG) (PDF)
    • 0550G_0560G-1200AC – Aussie Dual System – Typical Lagging Wall (DWG) (PDF)
    • 0550G_0560G-1212AC – Aussie Dual System – Over Lagging (DWG) (PDF)
    • 0550G_0560G-1214AC – Aussie Dual System – Over Concrete (DWG) (PDF)
    • 0550G_0560G-1220AC – Aussie Dual System – Over Lagging Rock Pocket (DWG) (PDF)
    • 0550G_0560G-1221AC – Aussie Dual System with Aussie Clay Underslab – Rock Pocket (DWG) (PDF)
    • 0550G_0560G-1530AC – Aussie Dual System – Metal Tie Back Cover (DWG) (PDF)
    • 0550G_0560G-1531AC – Aussie Dual System – Detensioned Tie Back (DWG) (PDF)
    • 0550G_0560G-1532AC – Aussie Dual System – 4 Inch Tie Back Cover (DWG) (PDF)
    • 0550G_0560G-1533AC – Aussie Dual System – 6 Inch Tie Back Cover (DWG) (PDF)
    • 0550G_0560G-1534AC – Aussie Dual System – 8 Inch Tie Back Cover (DWG) (PDF)
    • 0550G_0560G-1536AC – Aussie Dual System – Wall Pipe Raker (DWG) (PDF)
    • 0550G_0560G-1540AC – Aussie Dual System – Back Lagged Soldier Pile (DWG) (PDF)
    • 0550G_0560G-1544AC – Aussie Dual System – Cement Board at Grade (DWG) (PDF)
    • 0550G_0560G-4000AC – Aussie Dual System – Penetration Through Wall (DWG) (PDF)
    • 0550G_0560G-4002AC – Aussie Dual System – Multiple Penetrations Through Wall (DWG) (PDF)
    • 0550G_0560G-4005AC – Aussie Dual System – Sleeved Pipe Penetration (DWG) (PDF)
    • 0550G_0560G-4010AC – Aussie Dual System – Cored Penetration (Sealant on HDPE Side) (DWG) (PDF)
    • 0550G_0560G-4100AC – Aussie Dual System – Rebar Tie (DWG) (PDF)
    • 0550G_0560G-7502AC – Aussie Dual System – Grade Termination 01 (DWG) (PDF)
    • 0550G_0560G-7505AC – Aussie Dual System – Grade Termination 02 (DWG) (PDF)

Sign-up For Our Newsletter

Get the latest news, product information and up-to-date industry information.

Please fill in your full name

This field is required

Your email address will never be used for evil

This field is required

This field is required

You may unsubscribe at any time.