Got a Question?

Request More Info on the AVM System 580 AL

Contact Us
Aussie Mate 580-ALh

Aussie Mate 580-AL

Bituminous Sheet Membrane

The AVM Aussie Mate 580-AL is a 60-mil heavy duty bituminous waterproofing sheet membrane with an aluminum protection layer. AVM Aussie Mate 580-AL exhibits excellent adhesion, elongation and recovery properties. Unlike other sheet membranes, AVM Aussie Mate 580-AL can be exposed to U.V. up to 180 days. In addition, AVM Aussie Mate 580-AL is approved for methane.

ICC ESR-5396L.A. RR#26138


AVM Placeholder Logo

AVM Primer 580-SB-HV

AVM Placeholder Logo

AVM Primer 580-SB-LV

Drain Board 6000/6020 Prefabricated HDPE Drainage Composite

Drain Board 6000/6020

4'x50' | 8’x50’

Provides protection and drainage management





0580-AL_580-PL – View-ALL (PDF)
0580-AL_0580-PL-0001 – Backfilled Wall Vertical Overview (DWG) (PDF)
0580-AL_0580-PL-0002 – Backfilled Wall on Footing with Vapor Barrier (DWG) (PDF)
0580-AL_0580-PL-0004 – Transition to Vapor Barrier, Backfilled Wall Flush Footing (DWG) (PDF)
0580-AL_0580-PL-0006 – Transition to Aussie Skin Underslab, Flush Footing (DWG) (PDF)
0580-AL_0580-PL-0102 – Elevator Pit Transition to Aussie Skin, Extended Footing (DWG) (PDF)
0580-AL_0580-PL-0104 – Elevator Pit Transition to Aussie Skin, Flush Footing (DWG) (PDF)
0580-AL_0580-PL-1102 – O1 Deck to Wall Transition, ISO (DWG) (PDF)
0580-AL_0580-PL-1104 – O2 Deck to Wall Transition (DWG) (PDF)
0580-AL_0580-PL-1106 – Split Slab Assembly (DWG) (PDF)
0580-AL_0580-PL-1108 – Split Slab Edge Termination (DWG) (PDF)
0580-AL_0580-PL-1200- Control Joint (DWG) (PDF)
0580-AL_0580-PL-1504 – Deck Drain-Flush (DWG) (PDF)
0580-AL_0580-PL-1506 – Deck Drain with Inspection Cover (DWG) (PDF)
0580-AL_0580-PL-1508 – Split Slab Two-Stage Drain (DWG) (PDF)
0580-AL_0580-PL-6002 – Planter Terminations (DWG) (PDF)
0580-AL_0580-PL-6004 – Sidewalk Termination (DWG) (PDF)
0580-AL_0580-PL-6006 – Backfilled Wall Terminations (DWG) (PDF)
0580-AL_0580-PL-6502 – Typical Wall Penetration (DWG) (PDF)
0580-AL_0580-PL-6504 – Cored Wall Penetration (DWG) (PDF)
0580-AL_0580-PL-6505 – Sleeved Wall Penetration (DWG) (PDF)
0580-AL_0580-PL-6506 – Penetration Target Patch Sheet (DWG) (PDF)
0580-AL_0580-PL-6510 – Multiple Pipe Penetration (DWG) (PDF)
0580-AL_0580-PL-6512 – Deck Pipe Penetration (DWG) (PDF)
0580-AL_0580-PL-7004 – Lapping-Detail (DWG) (PDF)
0580-AL_0580-PL-7006 – Outside Corner (DWG) (PDF)
0580-AL_0580-PL-7008 – Inside Corner (DWG) (PDF)


0580-AL-Methane – View-ALL (PDF)
0580-AL-0002 – Backfilled Wall on Footing with Vapor Barrier (DWG) (PDF)
0580-AL-0004 – Transition to Vapor Barrier, Backfilled Wall Flush Footing (DWG) (PDF)
0580-AL-0101-Methane – End Outlet Connector (DWG) (PDF)
0580-AL-0110 – Methane DV Vent (DWG) (PDF)
0580-AL-4001-Methane – Under Slab Assembly over Compacted Earth (DWG) (PDF)
0580-AL-4011-Methane – Under Slab Assembly over Severely Contaminated Earth (DWG) (PDF)
0580-AL-4016-Methane – Typical Horizontal Membrane Termination (DWG) (PDF)
0580-AL-4018-Methane – Typical Vertical Membrane Termination (DWG)(PDF)
0580-AL-4020-Methane – Sub-Slab Vent System (DWG) (PDF)
0580-AL-6710-Methane – Multiple Pipe Bank Pitch Pan (DWG) (PDF)
0580-AL-6712-Methane – Vertical Pipe Penetration (DWG) (PDF)
0580-AL-6714-Methane – Typical Floor Drain (DWG) (PDF)
0580-AL-7002-Methane – Lapping-Detail (DWG) (PDF)